*Written by David P. Biss, Ph.D.*

The modulation transfer function (MTF) provides vital information about the imaging performance of an optical system. Measuring the MTF of a lens or lens assembly is a reliable way to assess lens quality and is used across multiple industries; including defense, automotive, medical devices.

To generate reliable and accurate MTF data, proper control of all imaging parameters is required. One parameter of particular interest is conjugation. Most imaging systems are designed to work for a specific object conjugate distance. Measurement of an optical system at incorrect conjugates can produce misleading results, which can lead to incorrect assumptions about system performance and wasted engineering and development time.

The two most common conjugation errors made when measuring MTF are:

**Testing an infinite conjugate optic with a finite conjugate target.**Simulating an infinitely distance object can be practically difficult. Often, the assumption is made that an infinite object can be approximated by a finite, but relatively large object distance; for example, the hyper-focal distance of the system under test or 100 times its effective focal length. These finite distances can easily be shown to provide misleading data.**Testing a finite conjugate optic with an infinite conjugate target.**Configuring a system to measure MTF at a finite conjugate involves other practical difficulties, such as challenging alignment procedures and limited system flexibility. It can be tempting to test a finite conjugate optic using an existing system with an infinite conjugate source. However, this will again produce misleading data.

To demonstrate the impact of these errors, scenarios (a) and (b) were modeled in ray-trace software and the predicted MTF was compared at two conjugate distances. For scenario (a), analyses were performed using a Zemax sample lens file consisting of a 5° Double Gauss lens (Figure 1). This is an f/1 lens with an effective focal length (EFL) of 4 mm. The MTF was evaluated on-axis and at an object angle of 2.5°.

Figure 2 shows the MTF of the Double Gauss lens on-axis for an infinite object and an object 400 mm from the first surface (100 times the lens’ EFL). The difference in MTF between these two object conjugates is a greater than 5% difference at the mid-spatial frequencies of the system (200 to 800 LP/mm).

To determine the minimum object distance required to simulate an infinite object, the percent modulation at 340 LP/mm was calculated for object conjugates ranging from 10 mm to 10 m (Figure 3). For this situation, the MTF reaches a constant value beyond an object distance of about 2 m from the lens.

To examine scenario (b) we modeled an f/5, 1:1 relay lens with an effective focal length of 142 mm. The MTF was evaluated on-axis only. Figure 4 shows the layout of this lens design and the MTF with object conjugates at infinity and at 250 mm is shown in Figure 5.

In this case, the discrepancy between finite and infinite conjugate MTF measurements is even more pronounced. In fact, one could mistakenly conclude that this lens was underperforming based on the infinite conjugate data.

Overall, it is important to consider the conjugates for which your system was designed and how it will be used when designing a test configuration. When testing an infinite conjugate system with a finite source, it is important to model the MTF performance to determine an appropriate object distance rather than relying on rules of thumb. At Optikos, we use our infinite conjugate benches to test in these scenarios. For finite conjugate systems, one needs to be aware that testing with an infinite conjugate source is not a replacement for testing at proper conjugates. This is true both when testing lenses alone and when testing full camera systems.

## Infinite Conjugate Test Platforms

The two work horse systems of Optikos Corporation’s lens testing line is the OpTest and LensCheck system. Both systems can be used to measure lens MTF with infinite object conjugates. A standard OpTest bench can be upgraded to perform afocal measurements, suited for rifle scopes, sighting scopes, and other afocal systems.

While the data shown is specific to lens systems, proper conjugate testing is relevant to camera MTF or SFR testing. Optikos Corporation provides the I-SITE^{TM }system to measure MTF of thermal camera system.

## Finite Conjugate Test Platforms

There are variants of both the OpTest® and LensCheckTM systems (Figure 8 and Figure 9) that are for users who need finite conjugate test platforms. These systems feature translatable sources that allow for variation in the required object conjugate distance.

## Meridian Test Platform

The MeridianTM Production Camera Test System (Figure 6) is specifically designed to test cameras with target generators designed for either fixed or adjustable conjugate distances.

## Other Test Platforms

Optikos Corporation has also extensive experience in custom measurements systems. Optikos has developed multiple endoscope testing platforms (Figure 7), for MTF measurement at finite conjugates of complete endoscope systems.

Optikos regularly customizes their existing product line to meet the requirements of customer’s specific test station requirements. One LensCheck system variant includes an adjustable conjugate system (Figure 9) that enables the user to perform automated testing of multiple object conjugates.

Optikos Corporation provides both finite and infinite conjugate test platforms for a multitude of lens and camera systems. More information on Optikos MTF testing products is available here: https://www.optikos.com/metrology/.